The Promise – and Challenge – of Hydrogen 바카라 오토 Cells
Coherent FL-ARM 바카라 오토s enable cost-effective welding of bipolar plates, a key component of PEM fuel cells.
September 16, 2022 by바카라 오토
Imagine a highly fuel-efficient car engine that only produces pure water as an exhaust. That’s a hydrogen fuel cell. And it already exists. However, we’re not ready yet to use hydrogen fuel cells to power automobiles on a large scale. That will require developing quite a bit of technology and infrastructure to make them practical and cost-competitive with other technologies. Coherent is already developing fiber 바카라 오토 processes to contribute to that effort.
바카라 오토ing the technology
Technically, the hydrogen 바카라 오토 cell is referred to as the proton-exchange membrane 바카라 오토 cell (PEMFC), or the polymer electrolyte membrane 바카라 오토 cell. It contains positive and negative electrodes separated by an electrolyte (a fluid that conducts electricity). Hydrogen 바카라 오토 comes in at the negative electrode, and air (containing oxygen) comes in at positive electrode.
A single 바카라 오토 cell (called a membrane electrode assembly or MEA) produces less than one volt. This is way too little for most purposes. To reach useful power levels, hundreds of MEAs are electrically connected together within a single 바카라 오토 cell. The MEAs are physically stacked together inside the cell housing.
But first, each MEA is sealed between two “바카라 오토 plates.” This is a stamped foil part, usually somewhere between 50 µm to 100 µm thick. It’s usually made from stainless steel or titanium. The 바카라 오토 plates allow the individual MEAs to be electrically connected, give the assembly some mechanical strength and rigidity, and also contain a set of channels that allows gases and cooling liquids to flow over it.
The bipolar plates are sealed together by 바카라 오토. This needs to be a very high-quality weld – it has to pass a hydrogen leakage test. And, the complex shape of the bipolar plate, which includes several cutouts, makes the weld paths long, and with numerous curves.
Traditional fiber 바카라 오토s can’t seal the deal
Because of the very large number of bipolar plates used in each fuel cell, the sealing process needs to be fast. Otherwise, it can create a production bottleneck. It is currently estimated that economically viable and practical PEMFC production for automotive applications requires a 바카라 오토 speed of over 1 m/sec for the MEA sealing process.
Fiber 바카라 오토s delivered through a scanning system can weld at those speeds, and more. Plus, they can produce the complex shaped welds required. But the weld quality they offer at those feed rates isn’t good.
In particular, traditional fiber 바카라 오토s tend to produce “humping” when welding bipolar plates at high speeds. These are small bumps in the weld seam produced when turbulent areas in the melt pool resolidify. This turbulence is caused directly by the very rapid beam movement.
Humps are a problem because they stick up. This prevents the MEAs from being stacked close enough together during assembly.
HighLight FL-바카라 오토 gets over the hump
Testing at Coherent Labs has demonstrated that a properly configured Adjustable Ring Mode (ARM) fiber 바카라 오토 solves the problem of humping. Specifically, a CoherentHighLight FL4000CSM-바카라 오토(4 kW 바카라 오토 with a single mode center beam) can weld stainless steel bipolar plates at speeds of at least 1.2 m/s without any humping. This is 50% faster than previously possible with fiber 바카라 오토s. For these tests, the 바카라 오토 was delivered through aCoherent HIGHmotion 2D Remote 바카라 오토 Welding Head.
The ARM fiber 바카라 오토 avoids the problem of humping by eliminating turbulence around the rapidly moving weld melt pool. This is accomplished by taking advantage of the Adjustable Ring Mode architecture.
Specifically, the center beam power is set high enough to produce full penetration keyhole 바카라 오토 at the target speed. But the ring beam only carries enough power to melt the material – so that it can flow – but not enough to create a weld keyhole.
This provides a zone around the center beam where the melted material can slow down and flow in a laminar (non-chaotic) fashion. Furthermore, the symmetric, round ARM 바카라 오토 beam always welds the same way no matter which direction it’s heading in. So, there’s no change in weld characteristics when going through curves or changing direction. This provides an advantage over other multi-beam fiber 바카라 오토s which don’t have a symmetric spot.
Of course, there are many other challenges in deploying fuel cells. These include other cell manufacturing issues, sourcing hydrogen and platinum (which is used as a catalyst to separate the hydrogen atom into protons and electrons). We would also need to develop a network of hydrogen “gas stations” to make getting fuel convenient for the consumer. But, with the HighLight FL-ARM 바카라 오토 – and the extensive process knowledge Coherent Labs possess about using it effectively for bipolar plate welding – we’ve bypassed one important roadblock in that journey.
See high-speed bipolar plate 바카라 오토 in action.
